Configuring the Tilta Motor
On each Tilta Motor:
Natigate to the settings menu.
Under wireless, set the wireless mode to OFF as we will be controlling the motor through Lensmaster and not using the wireless hand unit.
Under motor number select the motor number according to the below. The motor number determines what FIZ axis is controlled by this motor.
N1: Focus Channel
N2: Iris Channel
N3: Zoom Channel
Under Auto Calibration Mode, set the motor to auto calibrate after 3 seconds. This will save you having to manually trigger calibration on the motors every time they are powered on.
Last modified: 29 March 2025