Lensmaster Help

HyperDeck Setup Guide

On HyperDeck:

  1. Connect your HyperDeck to your system's network via an Ethernet cable.

  2. Go to Menu | Setup | Protocol | Select 'Static IP'

  3. Assign a static IP address compatible with your network subnet.

    Default is 192.168.2.130

  4. Go to Menu | Setup | IP Address | Enable remote control.

On Lensmaster:

  1. Go to Edit | Preferences | HyperDeck and enter your configured HyperDeck IP Address. You should now be able to connect to HyperDeck.

  2. Connect to your HyperDeck through the Connection Manager or the HyperDeck Manager.

Setting Preview Mode

The HyperDeck has two modes: 'Live' and 'Playback'.

Default Mode

Go to Edit | Preferences | HyperDeck Configuration and set the default preview mode you wish the HyperDeck to be in when connecting to Lensmaster.

Switch Mode

To switch between modes, click the mode-display button in the HyperDeck Manager or via the Connection Manager.

Last modified: 29 March 2025