Camerabotics Action Server Help

First Power-Up

The action-server will automatically connect into Lensmaster over Ethernet out of the box.

First Power Up

  1. Connect the provided 110 to 220 volts power cable to the back of the Action Server

  2. Connect the Action Server to the same Network Switch where the robot and host PC are connected via a standard Ethernet cable.

  3. By default, the Action Server network settings are set to be on the same default subnet network settings as the robot.

  4. If you have changed your robot or host PC IPv4 network settings, you need to make similar changes to the Action Server. Use the display menu to update the network settings.

Once the settings are applied, the Action Server will self-detect in the Lensmaster Action Server Status Control menu.

Last modified: 05 August 2024
Device OverviewUser Interface